A Mold Professional is waiting for your call, not an answering service
Servicing Toronto & the surrounding GTA

Why Buying A New Home Is Not An Automatic Fix For Your Mold Related Concerns

3555845248_6d1d196dde

Why Buying A New Home Is Not An Automatic Fix For Your Mold Related Concerns

Last Updated on October 12, 2015

Buying a new home is often an exciting endeavor, although this greatly depends on why you are buying it. If you are buying a new home because you have concerns about mold in an old home, there are a number of truths that you probably don’t know. And the most important one is that even a new house has its fair share of mold related risks.

There are some basic tips that should get you to buy a good home that is free from mold and most of its associated risk factors, with the most important tip being that you must get a mold inspector to check the property out. Anyway, here are some reasons that make that new house as much of a challenge as an old house.

Bad plumbing

3555845248_6d1d196dde

The first step to looking for mold risks in a house is usually related to looking for leakages, water stains and burst pipes. This is why most home inspectors will just check out the walls and ensure that there are no water stains. This however will only work on an old house. A new house has a fresh coat of paint, and the plumbing system is yet to be tried and tested. This means that you cannot commit to its mold situation based on a problem that is yet to manifest itself.

The plumbing in a new house could be just as bad as the one in an old house, after some years of use. This explains why most people today have to deal with mold related challenges in less than five years after moving into a new house.

Poor quality construction materials

If you are moving into a house that has problems commonly associated with the development of mold, whether it is new or old is inconsequential. If the house was built using poor construction materials, there must be a problem of water seeping through the walls or the floors at some point. This means that you will experience in mold related problems sooner or later.

A simple rule here would be to stick to houses that are of good quality, if you have a way of establishing this. Just because the new house has some new flooring or carpet does not mean that you will live happily ever after. Be sure to do some research on the construction materials that were used first.

Quick developments

These are actually a sure risk for you, and yet they are the most common type of homes in the market. Homes that spring up overnight are never a good idea if you are trying to avoid mold. The designs are usually shoddy and the jobs done on a low budget. This implies undeniable limitations in terms of the quality of the home. And whether it is a cheap home or an expensive one, if it came up suddenly it is probably not of good quality. Avoid anything that has doubtable quality when buying a home.

All that glitters

When you are looking at an old home, you will pay attention to everything including the leaks in the roof. But for the new one, you are likely to assume that it is in perfect condition, and you could be right, for the moment. The reality is however that the perfection is only a front to get you to commit to the house.

A new home is supposed to be perfect, but it is often far from it. And the worst part is that you will not see any of the usual warning signs in the home inspection report. This is probably why you should seek out reliable mold inspections in Toronto whether you are buying a new house or an old one. Sometimes, it’s not just about the numbers.